Tabla de contenido
Publicidad
Troubleshooting
SBC priority connections (for when sound is delayed significantly)
When the connection codec is AAC, significant sound delays can be alleviated by changing the connection codec to
SBC, which comes standard with Bluetooth devices.*
• For details on the flashing and lit displays of the indicator lamp, refer to "Indicator lamp display" (p. 10).
Connecting to a SBC priority connection
When the pairing with a Bluetooth device has been completed
1. Turn the product power to "ON".
2. With music or video paused, press and hold the + and - volume buttons simultaneously (for about 2 seconds).
• If the indicator lamp flashes in purple and then continues with short flashes in purple, the settings are complete.
• After the settings are complete, this product will automatically be connected to the Bluetooth device for which
pairing was completed.*
Before pairing with a Bluetooth device
1. Turn the product power to "ON".
2. With the indicator lamp showing the searching for device status, press and hold the + and - volume buttons
simultaneously (for about 2 seconds).
• The indicator lamp will flash in purple.
3. With the indicator lamp flashing in purple, refer to steps 2 and 3 of "Pairing a Bluetooth device" (p. 6) to perform
the pairing operation.
• If the indicator lamp changes to short flashes in purple, the settings are complete.
• After pairing via an SBC priority connection is complete, the only available connection codec will be SBC.
Connections using other codecs will not be possible.*
*1 Depending on the usage environment, changing to an SBC priority connection may not alleviate sound delays.
*2 If a connection is not made automatically, refer to "Pairing a Bluetooth device"(p. 6) and perform pairing operations again.
*3 Turning the power off and then turning it back on will result in a return to a normal connection and enable connections using
other codecs. Please connect using an SBC priority connection when necessary.
2
1
3
13
Publicidad
Tabla de contenido
