Pairing A Bluetooth Device - Audio-Technica ATH-CKS550XBT Manual De Usuario

Connecting via Bluetooth wireless technology
About pairing
To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Once they are paired,
you do not need to pair them again.
However, you will need to pair again in the following cases:
• If the product is deleted from the Bluetooth device's connection history.
• If the product is sent out for repair.
• If 9 or more devices are paired.
(This product can save the pairing information of up to 8 devices. When you pair with a new device after pairing with
8 devices, pairing information for the device with the oldest connection date will be overwritten by the information for
the new device.)

Pairing a Bluetooth device

• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the
confirmation tone.
1. Starting with the product turned off, slide the power switch to the "ON" position.
• The indicator lamp will light in purple, and then flash in red and blue.
2. Use your Bluetooth device to begin the pairing process and search for the
product.
When your Bluetooth device finds the product, "ATH-CKS550XBT" will be
displayed on the device.
• For information about using your Bluetooth device, refer to the device's user
manual.
3. Select "ATH-CKS550XBT" to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter "0000". The passkey
may also be called a passcode, PIN code, PIN number, or password.
• The product sounds a confirmation tone when pairing is complete.
6
12:00 100%
Bluetooth
ON
ATH-CKS550XBT