GE Profile Opal Manual Del Propietário página 9

Care and Cleaning
Removal of Mineral Deposits
purchase an Opal Cleaning Kit and follow instructions inside.
3. Clean the sensors with vinegar and wipe clean with water. After draining the vinegar, run
location of the sensors. Appearance may vary based on model.
Figure 11
Cleaning the Bin and Tray
To clean the ice bin, remove the ice bin from the ice maker and clean with a soft cloth dampened with soapy water.
The drip tray should be wiped dry. Water left in this area may leave deposits. To clean the drip tray, remove the tray
not use solvents or chemicals.
49-1000418 Rev. 4
Figure 12
Do not use solvents or chemicals.
Figure 13
Do
9