Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-3014G
Chevrolet Silverado 1500/GMC Sierra 1500 2014-up
Chevrolet Silverado 2500/3500 2015-up
GMC Sierra 2500/3500 2015-up
KIT FEATURES
• ISO DIN radio provision with pocket
• Double DIN radio provision
• Painted gunmetal gray
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8" truss-head Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • GMOS-LAN-09 • GMOS-MOST-01 • LC-GMRC-LAN-09 • AX-LCD
Antenna Adapter: • 40-EU55
METRA. The World's best kits.
99-3014G
C
™
1-800-221-0932
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
– Double DIN radio provision ................................... 4
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench • Cutting tools (like a Dremel)
D
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
Table of Contents
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-3014G
Resumen de contenidos para Metra 99-3014G
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-3014G Chevrolet Silverado 1500/GMC Sierra 1500 2014-up Table of Contents Chevrolet Silverado 2500/3500 2015-up Dash Disassembly ..........2 GMC Sierra 2500/3500 2015-up Kit Assembly 99-3014G – ISO DIN radio provision with pocket ...... 3 – Double DIN radio provision ........4 KIT FEATURES •...
-
Página 2: Dash Disassembly
99-3014G Dash Disassembly 1. Unclip and remove the trim panel surrounding the radio/climate control panel. (Figure A) 2. Remove (4) 9/32” screws securing the radio/climate control panel. (Figure B) 3. Unclip and remove the factory climate controls 4. Remove (2) 9/32” screws securing... -
Página 3: Kit Assembly
99-3014G Kit Assembly 1. Cut and remove the specified areas in the sub dash. (Figures A, B) Continued on next page (Figure A) (Figure B) - Página 4 (Figure A) (Figure B) (Figure C) 5. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 6. Reassemble the dash in reverse order of disassembly.
- Página 5 (Figure B) 3. Clip factory climate controls into the radio trim panel 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter (Figure A) (Figure B) from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
- Página 6 99-3014G...
- Página 7 99-3014G...
- Página 8 INSTALLATION INSTRUCTIONS FOR PART 99-3014G NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
- Página 9 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3014G Chevrolet Silverado 1500/GMC Sierra 1500 2014 y mas Indice Chevrolet Silverado 2500/3500 2015 y mas Desmontaje del tablero ......... 2 GMC Sierra 2500/3500 2015 y mas Ensamble del kit 99-3014G – Provisión de radio ISO DIN con cavidad ....3 –...
-
Página 10: Desmontaje Del Tablero
99-3014G Desmontaje del tablero 1. Desenganche y quite el panel de moldura que rodea el panel del radio/control del clima. (Figura A) 2. Quite los (4) tornillos de 9/32” que sujetan el radio/panel de control del clima. (Figura B) 3. Desenganche y quite los controles del clima de fábrica. -
Página 11: Ensamble Del Kit
99-3014G Ensamble del kit 1. Corte y quite las áreas especificadas en el sub tablero. (Figura A, B) Continúa en la página siguiente (Figura A) (Figura B) - Página 12 5. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS.
- Página 13 4. Localice el arnés de cables (Figura A) (Figura B) de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad...
- Página 14 99-3014G...
- Página 15 99-3014G...
- Página 16 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3014G EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.