Cleaning And Maintenance - Cuisinart CPT-320 Manual De Instrucciones

To stop cycle
When the Bagel cycle is finished, the bread will be raised. If you wish
to stop the cycle before it is finished, simply press the Cancel button.
After use, unplug your toaster from the electrical outlet.
Defrost Button
The Defrost feature is designed to first defrost and then toast the bread, which
extends the Toasting cycle slightly.
1. Insert slice(s) of bread.
Be sure that the carriage is in the up position.
2. Select the browning control.
3. Press the carriage control lever until it locks into position.
4. Press the Defrost button. Red LED indicates feature is activated.
To stop cycle
When the Defrost cycle is finished, the toast will be raised. If you wish
to stop the cycle before it is finished, simply press the Cancel button.
After use, unplug your toaster from the electrical outlet.
Reheat Button
The Reheat feature allows you to reheat bread without browning or toasting.
1. Insert slice(s) of bread.
Be sure that the carriage is in the up position.
2. Press the carriage control lever until it locks into position.
3. Press the Reheat button. Red LED indicates feature is activated.
To stop cycle
When the Reheat cycle is finished, the toast will be raised. If you wish
to stop the cycle before it is finished, simply press the Cancel button.
After use, unplug your toaster from the electrical outlet.
All manuals and user guides at all-guides.com

CLEANING AND MAINTENANCE

Always allow the toaster to cool completely before cleaning.
1. Always unplug the toaster from the electrical outlet.
2. Do not use abrasive cleaners. Simply wipe the exterior with a clean,
3. To remove crumbs, slide out the crumb tray and discard crumbs.
4. To remove any pieces of bread remaining in the toaster, turn
5. Never wrap the cord around the outside of the toaster. Use the cord
6
5
damp cloth and dry thoroughly. Apply any cleaning agent to a cloth,
not to the toaster, before cleaning.
Wipe clean and replace. Never operate the toaster without the crumb
tray in place.
the toaster upside down and gently shake. Never insert any hard or
sharp instruments into the slots, as this could damage the toaster and
cause a safety hazard.
storage cleats on the underside of the toaster.
Any other servicing should be performed by an authorized
service representative.