Johnson Controls VA9310 Serie Instrucciones De Instalación página 3

Dimensions
Optional
Thermal
Barrier
C
Figure 1: Valve and Actuator Dimensions (With Optional M9000-561 Thermal Barrier)
Table 2: VA9310-HGA-2 Actuated VG1241, VG1245, VG1841, and VG1845 Series Ball Valve Dimensions,
in. (mm)
Valve Size, in. (DN) A (With Thermal
Barrier)
1/2 (DN15) 5-3/4 (146)
3/4 (DN20) 5-3/4 (146)
1 (DN25) 5-13/16 (148)
1-1/4 (DN32) 6-1/4 (159)
1-1/2 (DN40) 6-13/32 (163)
2 (DN50) 6-5/8 (168)
Mounting
You can mount the VA9310 actuator directly to the
valve for preferred performance or with the M9000-561
thermal barrier when high-temperature fluid is used or
additional spacing for insulation is needed.
X X X X X X
Figure 2: Mounting Positions
VA9310 Series Electric Non-Spring Return Valve Actuators Installation Instructions
3-1/2 in. (89 mm)
A
Optional
Thermal
Barrier
B
A (Without
Thermal Barrier)
4-3/8 (111)
4-3/8 (111)
4-7/16 (113)
4-7/8 (124)
5-1/32 (128)
5-1/4 (133)
3
D
B C
21/32 (17) 1-7/32 (31)
21/32 (17) 1-7/32 (31)
3/4 (19) 1-5/16 (33)
1-1/32 (26) 1-23/32 (44)
1-1/8 (29) 1-7/8 (48)
1-15/32 (37) 2-1/16 (53)
Installing the Conduit Connector
1. Slide the connector onto the actuator.
2. Turn the connector and lock it into position.
D
6-13/32 (163)
6-13/32 (163)
6-13/32 (163)
6-13/32 (163)
6-13/32 (163)
6-13/32 (163)