Taurus ALPATEC AC205RVKT Manual Del Usuario página 18

mechanical failure.
- Individuals who operate or work
on the refrigerant circuit must
have the appropriate certifica-
tion issued by an accredited
organization that ensures com-
petence in handling refrigerants
according to a specific evalua-
tion recognized by associations
in the industry.
- Repairs must be performed
based on the recommendation
from the manufacturing com-
pany. Maintenance and repairs
that require the assistance of
other qualified personnel must
be performed under the super-
vision of an individual specified
in the use of flammable refrig-
erants.
SAFETY ADVICE AND WARN-
INGS
- This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capacities, or
by persons without experience
or knowledge, unless they have
benefited from it, by the '' inter-
mediary of a person responsi-
ble for their safety, monitoring
or prior instructions regarding
the use of the device
- This appliance is not a toy.
Children should be supervised
to ensure that they do not play
with the appliance.
- Do not allow children to perform
cleaning and maintenance with-
out supervision.
- The device must be installed in
accordance with the national
electrical installation rules.
- Leave a space of 30cm be-
tween walls or other obstacles
and the appliance. Do not cover
or obstruct the sides of the ap-
pliance, leaving at least 30 cm
space around the appliance.
- The product requires adequate
ventilation in order to function
properly.
- The fuse used in the appliance
is type: AC3,15A, electrical
characteristics: 250V.
- If the power cable is damaged,
it must be replaced by the man-
ufacturer, its after-sales service
or persons with similar quali-
fications in order to avoid any
danger.
- Take the appliance to an au-
thorized service center. Do
not attempt to disassemble or
repair it yourself as it may be
dangerous.
- This appliance is intended for
household use only, not for pro-
fessional or industrial use.
- Before connecting the appliance, check that the
voltage indicated on the nameplate matches
the voltage on the rating plate.
- Connect the appliance to a power socket that
supports at least 16 amps.