Kohler K-10103 Guia De Instalacion página 5

Valve Body
Assembly
Gasket
Screws or
Fasteners
3. Mount the Valve Body Assembly
CAUTION: Risk of restricted waterflow and product damage.
Use extreme care to avoid kinking and twisting the supply
hoses. Hoses must not be taut when installed. If the supply
hoses must be coiled, maintain an inside coil of 3" (7.8 cm).
CAUTION: Risk of Property Damage. Use caution during
installation to prevent contact with wires, pipes, appliances, or
other items that could be behind the mounting surface. The
method for fastening must not create a hazard in adjacent areas,
such as exposed screws. Provide a suitable method for fastening
the valve to the wall or cabinet.
NOTE: The valve body assembly must be installed vertically.
NOTE: When considering the valve body assembly location, select
an area to allow adequate clearance for servicing the battery and
allow access to the handle to control the water temperature.
NOTE: The valve body assembly should be mounted with two #8
wood screws (not supplied) or other suitable fasteners (not
supplied) based on the type and thickness of the cabinet or wall
material.
Fasten the valve body assembly to the cabinet.
Kohler Co. 5 1056542-2-B