Smoothskin Pure Fit Modes; Mode Button - Smoothskin PURE FIT Manual Del Usuario

11. SMOOTHSKIN PURE FIT MODES

You can treat your body using any one of the three SmoothSkin Pure Fit treatment modes:
Power Mode – No Indicator Gentle Mode – Indicator On
Power Mode is the highest power setting of the device. Power Mode will deliver the best results, as it is
using the maximum power output possible for your unique skin tone. This mode works particularly well
on stubborn areas where the hair tends to be denser, such as underarms and bikini line.
30
Speed Mode – Indicator On
Gentle Mode can be used if you find Power Mode uncomfortable or a little too painful. Operating the
device in Gentle Mode will reduce the power output, and you will notice less Power Bar indicators
illuminated when applied to your skin.
Speed Mode is the fastest mode, and therefore the lowest power mode. Speed Mode is best for
treating larger areas where the hair is less dense (such as arms or legs), and where you want to move
along the treatment area quickly. It can also be used as a maintenance mode, to be used to keep hair
regrowth at bay after your initial treatment regime.
Power Mode is the default setting when your device is switched on.
You can toggle between the three modes pressing the Mode Button
underneath the main Activation Button.
When in any of these modes, you can also choose whether to use Glide
Method or Stamp Method.
Stamp Method is recommended for small areas such as the underarm
and bikini line. Place the handset on the skin, press & release the
activation button. Remove from the skin before carefully re-applying to
the next treatment area.
Glide Method is recommended for larger areas such as legs. Place
the handset on the skin, hold down the activation button (press down
continuously), then glide the handset along the skin between flashes. Try
to move the handset at a steady speed that gives full coverage without
overlap or missed areas.
Activation
Button

Mode Button

31