Accessing The Leitz Icon Control Panel; Viewing The Printer Status; Changing The Network Settings - LEITZ Icon Guia Del Usuario

Leitz Icon Printer User Guide

Accessing the Leitz Icon Control Panel

You can access the Leitz Icon Control Panel from any web browser.
To access the Leitz Icon Control Panel
1.On your computer, search for available wireless networks.
For information on searching for wireless networks, see the documentation for your computer.
2.From the list of available networks, select your printer ID.
The Printer ID is formatted as ICON-xxyyzz and can be found on the label on the bottom of your printer.
If the label on the bottom of your printer does not contain the Printer ID, you can determine the Printer ID using the printer's
NOTE
MAC address. In this case, the Printer ID is formatted as ICON-xxyyzz, where xxyyzz is the last six characters of your
printer's MAC address (found on the label on the bottom of your printer). For example, if your printer's MAC address is
MAC:00:1E:CO:13:13:A5, the Printer ID is ICON-1313A5.
3.Click Join or Connect.
4.Once connected, start a web browser on your computer.
5.In the address bar, type 192.168.1.1 and then press Enter.
6.Enter your user name and password in the User name and Password boxes.
The default user name and password are as follows.
User name: Admin
Password: password
See Changing the User Name and Password on page 16 for information on changing the user name and password.
7.Click OK.
The Leitz Icon Control Panel is displayed.

Viewing the Printer Status

The Printer Status page displays the network status and settings for the printer.
To view the printer status
In the Leitz Icon Control Panel, click Printer Status.

The Printer Status page is displayed.

Changing the Network Settings

You can make changes to the network settings using the Setup Wizard.
To change the network settings
1.In the Leitz Icon Control Panel, click Wi-Fi Setup Wizard.
The Setup Wizard starts and guides you through the process of changing your settings.
2.Follow the instructions in the wizard to change your network settings.
3.Click Connect to save the changes and connect to your network using the new settings.
15
Using the Leitz Icon Control Panel