Adding The Printer To Your Computer And Installing The Printer Driver - LEITZ Icon Guia Del Usuario

Leitz Icon Printer User Guide
7.Click OK.
The Leitz Icon Control Panel is displayed.
8.Click Wi-Fi Setup Wizard.
9.Click Connect to Existing Network.
The Select Your Wireless Network page is displayed.
10.Select your wireless network in the Available Networks list.
11.If prompted, enter your network password and then click OK.
12.Click Next.
The Connection Settings page is displayed with the most common, default setting selected.
13.Unless you are performing an advanced installation needing a specific static IP address, click Next to use the default
settings.
14.On the Confirm & Connect page, click Connect.
As the printer connects to the selected network, you may hear a noise as the printer resets. At the same time, the wire-
less connection from your computer to the printer is dropped and you will need to reconnect your computer to your
wireless network.
15.Close the Leitz Icon Control Panel.

Adding the Printer to Your Computer and Installing the Printer Driver

If you connect the printer to your computer over your wireless network, you must also add the printer to your computer and
install the printer driver.
Adding the Printer to Your Computer and Installing the Printer Driver (Windows)
This section describes how to add the printer in Windows 8 and Windows 7. If you are using a different version of Windows,
refer to the Windows documentation for information on adding a network printer.
1.Click Start, click Control Panel, click Hardware and Sound, and then click Devices and Printers.
2.Click Add a printer.
The Add Printer dialog box appears.
(Windows 7 Only) Select Add a network, wireless, or Bluetooth printer.
3.
4.Click The printer that I want isn't listed.
The Find a printer by other options page is displayed.
5.Select Add a printer using a TCP/IP address or hostname, and then click Next.
9
Getting Started