Caring For The Printer; Troubleshooting; Printer Errors - LEITZ Icon Guia Del Usuario

Leitz Icon Printer User Guide

Caring for the Printer

The Leitz Icon printer requires very little maintenance. You may occasionally need to clean the label cartridge
compartment, the exterior of the printer, and the paper path.
If you experience lighter than normal printing or labels are protruding from the label cartridge when the cartridge is
removed from the printer, use the included cleaning card to clean the paper path.
To clean the label cartridge compartment
1.Push the button on the top of the printer to open the cartridge door.
2.Wipe the label cartridge compartment with a clean, dry, lint-free cloth.
To clean the exterior of the printer
Wipe the exterior of the printer with a soft, damp cloth.

Do not use cleaning tissues or chemical substances which might damage the surface
NOTE
To use the cleaning card
1.Push the button on the top of the printer to open the cartridge door.
2.Remove the label cartridge as described in Unloading Labels on page 13.
3.With the label guide latch in the open position, insert the cleaning card into the label feed slot approximately 3 cm
(1.2").
4.Close the label guide latch.
Keep the cartridge door open while using the cleaning card.
NOTE
5.Press and hold
6.Flip the cleaning card over and repeat steps 3-5.

Troubleshooting

This section includes information about what to do if you encounter a problem with your printer. If you need further
assistance, please visit the Support section of the Leitz website at www.leitz.com/icon/support.

Printer Errors

In addition to indicating the power and wireless connection status of the printer, the power and wireless status lights can
also indicate printer errors and other information.
Error/Status
Printer out of paper
or
Label loading failed
Cutter jam
Invalid or unreadable label cartridge
WPS connection in progress
For information about the power and wireless connection status, see Status Lights on page 5.
until the cleaning card exits through the label exit slot.
Power Status Light
Flashing once per second
Both status lights flash simultaneously twice per second
Status lights flash alternately; each light flashes once per second
On (Solid)
Wireless Status Light
As is; indicates wireless status
Flashing once per second
19
Caring for the Printer