Multi Variable Air Conditioners One-way Cassette Type Indoor Unit
4 Installation Instructions
4.1 Indoor unit installation
4.1.1 Ceiling opening Dimension and suspension bolt position.
4.1.2 Suspend the indoor unit
(1) Drill bolt holes and install bolts
1) Stick the reference cardboard on the installation position; drill 4 holes according to the hole
site on the cardboard as shown in fig 4.1.2; diameter of drilling hole is according to the
diameter of expansion bolt and the depth is 60-70mm, as shown in fig 4.1.3.
2) Insert the M10 expansion bolt into the hole and then knock the nail into the bolt, as shown in
fig 4.1.4.
Note: The length of bolt depends on the installation height of the unit, bolts are field supplied.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.