MTD 19B70028OEM Manual Del Operador página 13

39. Install the eyebolt assembly (#8) onto the handle mount
bracket (#11) with the wing nut (#20). See Figure 3-23.
Wing Nut
Figure 3-23
40. Slide the blade adjustment handle assembly (#2) into the
eyebolt (#16) and attach it to the outer hole on the blade
adjustment arm using a shoulder bolt (#28), flat washer
(#27) and flange lock nut (#19). See Figure 3-24 .
Shoulder Bolt
Flat Washer
Flange Lock Nut
Figure 3-24
41. Cut the cable tie securing the blade release cable to the
blade frame assembly. Unroll the cable. Using the mounting
screw (#35), mount the blade release cable lever to the blade
adjustment handle assembly (#2). See Figure 3-25.
Eyebolt Assembly
42. Secure the cable to the blade adjustment handle assembly
(#2) with the two cable ties (#25) provided. See Figure 3-26.
Outer
Hole
Mounting Screw
Figure 3-25
Cable Ties
Figure 3-26
S 3 — A
ection SSembly
Blade Release
Cable Lever
& S -U 13
et p