Tools Needed; Door Removal, Leveling And Alignment - Whirlpool 7WRS22FDBF Instrucciones Para El Usuario

Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.
NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the
refrigerator and freezer doors. If door removal is necessary, see the instructions below.
IMPORTANT: Before you begin, turn the refrigerator control OFF or turn cooling off. Unplug refrigerator or disconnect power. Remove
food, the ice storage bin (on some models), and any adjustable door or utility bins from doors.

TOOLS NEEDED:

Bubble level; flat-blade screwdriver; ⁵⁄₁₆" (8 mm) wrench; ¹⁄₄" (7 mm), ¹⁄₂" (13 mm), and ⁵⁄₁₆" (8 mm) hex-head socket wrenches
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
4
Top Left Hinge
A A
A. Do Not Remove Screws.
3
Wiring Connection
A B
A. Wiring Plugs
B. Wiring Clip
C. Grommets
2
Water Dispenser
Tubing Connection
A
A
A. Face of Fitting
28

Door Removal, Leveling and Alignment

5
A
C
WARNING
Electrical Shock Hazard
Door Removal
1
Base Grille
6
Top Right Hinge
A
A
A. Do Not Remove Screws.
7 Bottom Hinges
(Left and Right)
A
Do Not Remove Screw A
(present on some models)
8
Leveling
Raise
Lower
A
A. Leveling Screw
9
Door Alignment
(Bottom Right Hinge)
Raise
A
Lower
A. Alignment Screw