5 Slide the upper handle frame into lower handle then
depress the small buttons at the end of the upper handle
frame, push and insert into lower handle until it snaps
securely into place (Figs. 4 – 5).
Fig. 4
Fig. 5
Push button
6. Connect the high-pressure hose to the water outlet on the
washer (Fig. 6).
Fig. 6
High-pressure
Upper
water outlet
handle
frame
7. Fit the spray wand into the gun and rotate it until the two
Lower
handle
parts are completely locked (Fig. 7).
Fig. 7
Upper
handle
8. Connect the high-pressure hose to the trigger gun (Fig. 8).
frame
Fig. 8
Lower
handle
8
(REAR)
High-pressure hose
Trigger gun
High-pressure hose