Kohler K-T15290 Guia De Instalacion página 8

Cap
Screw
Washer
Handle
Plastic
Spline
Adapter
Escutcheon
Plumbers
Putty
5. Installing Acrylic Handles
Turn each valve to the closed position (hot = clockwise, cold =
counterclockwise).
Apply plumbers putty or other sealant to the underside of the
escutcheon according to the manufacturer's instructions.
Thread the escutcheon onto the valve body. Securely hand
tighten.
Remove any excess putty or sealant.
Position the spline adapters.
Position the handle as shown.
If the handles does not align properly remove the spline adapter,
turn it 1/4 turn and reinstall. Repeat until proper handle
alignment is attained.
Insert the screw and washer and tighten.
Push the cap into place.
1012829-2-C
Hot
Orientation of Handles
in Off Position.
8
Cold
Kohler Co.