Tools And Materials; Before You Begin - Kohler K-6573 Guia De Instalacion

Tools and Materials

Safety
Tape
Glasses
Measure
Drill

Before You Begin

CAUTION: Risk of personal injury or product damage.
Handle with care. Product can break, chip, cause injury or
product damage if handled carelessly. Get help lifting the
sink.
Read these instructions carefully before you begin this
installation.
Observe all local plumbing and building codes.
Shut off the hot and cold water supplies.
Inspect the drain and supply tubing. Replace if necessary.
Prior to installation, unpack the new sink and inspect it for
damage. Return the sink to its protective carton until you are
ready to install it.
Due to the variety of installations possible with this sink, you
may need to use procedures other than those described. Because
of the variety of tiles available, you must take careful
measurements prior to installation.
It is very important that the proper materials are used with your
sink. Proper selection of tile is critical for a secure installation.
Because of the variance in tile thickness, your carpenter, tiler, and
plumber must be aware of the exact type of tile you choose.
After selecting the tile, provide a sample to each contractor
involved in the project. It is very important that the carpenter,
tiler, and plumber maintain communication and discuss the
requirements of the project.
1019949-2-C
Plus:
• 1/2" or larger drill bit
Pencil
• Hole saw 1-3/8"
• Support frame members
• Sanding block
• Assorted sandpaper
• Orbital sander (optional)
Sealant
2 Kohler Co.