Tools And Materials Required - Kohler CORALAIS T-15880 Instrucciones De Instalación

TOOLS AND MATERIALS REQUIRED

S
Open end/adjustable wrenches
S
Adjustable arc pliers
S
1/2" Nom. (5/8" O.D.) tubing
S
Tubing cutter
S
Hole cutting equipment
S
Assortment of hex wrenches
2-1/8" (5.4cm)D.
1/4" (6mm) TO
2-1/8" (5.4cm)
MAX. RIM OR
DECK MOUNT
1-1/8" D.
RIM OR DECK
MOUNT
INSTALLATION
2-1/8" (5.4cm) D.
1/4" (6mm) TO
2-1/8" (5.4cm)
MAX. RIM OR
DECK MOUNT
1-1/8" D.
RIM OR DECK
MOUNT
INSTALLATION
.8<316
ROUGHING-IN
Install or relocate supplies as necessary to conform to
roughing-in dimensions.
* Dashed lines indicate items to be supplied by installer.
From centerline of spout inlet, to front of spout base, plus
1/2" (1.3cm), equals distance to rim or deck edge.
Distance between valve center-lines vary. Installation
instructions are given for an 8" (20.3cm) dimension.
Kohler Co.
9-11/16" (24.6cm)
1/4" (6mm) TO
1-1/4" (3.2cm)
MAX. FINISHED
DECK
7/8" D.
2-1/8" (5.4cm)
MAX. ROUGH
DECK
5/8" O.D.
5/8" I.D.
8" (20.3cm) MIN.
1/4" (6mm) TO
1-1/4" (3.2cm)
MAX. FINISHED
DECK
7/8" D.
2-1/8" (5.4cm)
MAX. ROUGH
DECK
5/8" O.D.
5/8" I.D.
8" (20.3cm) MIN.
S
Assorted screwdrivers
S
Long-nosed pliers
S
Plumbers Putty
S
Thread sealant
S
Soldering equipment and supplies
9-1/4" (23.5cm)
2" (5.1cm) D.
5-9/16"
(14.1cm)
ROUGH & FINISHED
DECK MOUNT
INSTALLATION
6-3/16" (15.7cm)
7" (17.8cm)
2" (5.1cm)
D.
3-1/2"
(8.9cm)
ROUGH & FINISHED
DECK MOUNT
INSTALLATION
Fig. #1
Diameter of hole in deck for spout = 1" (2.5cm).
Diameter of hole in deck for valve = 1-1/2" (3.8cm).
Provide rough or finished mounting surface.
NOTE: Thin deck/rim installations require additional
support under deck/rim. Use 1/2" (1.3cm) exterior grade
plywood.
2
3" (7.6cm)
EURO
2-9/16" (6.5cm)
CROSS
2-5/8" (6.7cm)
LEVER-4R
2-7/8" (7.3cm)
LEVER
2" (5cm)
STACKED
A
1011145-2-