Sauder 417714 Manual Del Usuario página 19

Step 13
Push four SAUDER TWIST-LOCK® FASTENERS (7F) into the large holes in the
å
OUTER ENDS (A and C).
Repeat this step for the INNER ENDS (B3 and D3), BOTTOMS (I2 and J2),
å
RIGHT MODESTY PANEL (K2), BACKS (N and O), LEGS (R and T), KEYBOARD
UPRIGHT (VV), and both SPACERS (L4).
NOTE: Do not insert a SAUDER TWIST-LOCK® FASTENER into the
å
UPRIGHTS (E2 and F2) at this time.
(29 used)
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
7F
A
C
417714 Page 19