Sauder 417714 Manual Del Usuario página 21

Step 15 Step
Fasten the WIDE EXTENSION RAILS (40MA) to the INNER LEFT END (D3)
å
and LEFT UPRIGHT (F2). Use four GOLD 5/16" FLAT HEAD SCREWS (3S)
through holes #1 and #3.
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in
å
the enlarged diagram. Then, slide the inner cartridge of the EXTENSION
RAIL out to fi nd the other holes that line up with the holes in the END and
UPRIGHT. Turn a SCREW into this hole.
Open end
www.sauder.com/services
D3
4
3
2
1
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
F2
417714
3S
Open end
1
2
3
4
Page 21