Honeywell Miller VR500 Manual De Instrucciones página 23

Söll VR500 Söll GlideLoc
An authorised person or body is only allowed to place an inspection label, if the fall
arrester is absolutely free from any defects after inspection and maintenance.
5.2 Confirmation of compliance for Eurasian Economic Union
This guided type fall arrestor is PPE against fall from height, it has passed procedure of
mandatory confirmation of compliance with requirements of Customs Union technical
regulations TP TC 019/2011 "On safety of PPE" in form of obligatory certification and
thus are marked with common mark of product circulation on the market of Eurasian
Economic Union.
5.3 Confirmation of compliance for ANSI and OSHA
This device is compliant with ANSI A14.3-2008 and OSHA 1910.29 requirements.
Reference to the European standard compliance
Reference to the ANSI standard compliance
Reference to OSHA 1910.29 standard compliance
Reference to Brazil standard compliance
INMETRO certification seal
Disposal of the product
(See chapter 4.7)
Fall indication arrows
23