Before Use; How To Install Filter - Coway airmega AP-1220B Manual Del Usuario

BEFORE USE

Please check before use!
This product is for 220 V- 240 V~ 50 Hz, 60 Hz only.
Make sure to connect the power plug to a
220 V- 240 V~ 50 Hz, 60 Hz outlet.

How to Install Filter

- Be sure to remove the packaging vinyl before installing the filter.
- Use the filter indoors only.
- Unplug the power cord from the outlet when not using the product.
- Check the front of the filter when installing it.
Tips
▶ Filter assembly order : HEPA filter → Deodorization filter → Customized Filter →
1. Open the front cover.
Pull both sides of the front cover to open it.
2. Take out the filter and remove the
packaging vinyl.
Remove the packaging vinyl of the filters
except the ultrafine Pre-filter and install them
onto the product according to the filter
installation order.
Insert the customized filter into the back of
the ultrafine Pre-filter.
∗ Filter installation order : HEPA filter → Deodorization filter → Customized Filter → Ultrafine Pre-filter
∗ The customized filter is sold separately and is not included with the product purchase.
3. Attach the front cover.
Align the two projections on the bottom of
the front cover with the grooves and push in
the cover to fix it.
∗ The product will not operate if the front cover is
not attached correctly.
Ultrafine Pre-filter
▶
9
10