Adjusting The Level Adjusters - NAMCO WANGAN MIDNIGHT Manual Del Operador

5-4

Adjusting the Level Adjusters

1. When the assembled game is in its final position, lower the twelve (12) level
adjusters, (4off Monitor Assy and 4off each Seat Assy), with a spanner so that
the machine is level and all castors are raised from the floor by approx. 5mm.
Tighten the lock nuts with a spanner to ensure that the level adjusters do not
move.
Note: If the location site of this machine has a polished floor it is recommended that
rubber pads are fitted under the level adjusters to prevent the machine sliding
on the floor when in use.
Lock Nut
Level adjuster
Page 39
Castor
Approx. 5mm