Notes On Installation; Lowering The Level Adjusters - NAMCO PAC-MAN BALL Manual Del Usuario

4-1

Notes on Installation

l l l l l
WARNING •
l l l l l
WARNING •
i
CAUTION •
NOTE •
4-2

Lowering the Level Adjusters

1. When the game is in it's final position, lower the four (4) level adjusters with a
spanner, so that all castors are raised from the floor by approx 5mm. Tighten the
lock nuts with a spanner to ensure that the Level Adjusters do not move.
NEVER turn the power to the machine ON until installation
has been completed.
In order to prevent possible electric shocks, be sure that the
machine is connected to the mains with a securely connected
earthed plug.
In order to avoid damage to the machine due to mis-operation,
ensure that the voltage of the mains supply is 230volts AC.
In order to gain access to the Power Supply and CPU assemblies,
make sure that the rear of the machine is separated from a wall
or other machine by at least 500mm.
Lock Nut
Level adjuster
Page 36
Castor
Approx. 5mm