Progress Lighting AirPro P250065 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Make the Electrical
Connections
WARNING: To avoid possible electrical shock,
be sure electricity is turned off at the main fuse
box before wiring.
WARNING: Check to see that all connections
are tight, including ground, and that no bare wire
is visible at the wire nuts, except for the ground
wire.
CAUTION: To reduce the risk of electric shock,
this fan must be installed with an isolating wall
control/switch.
NOTE: The fan must be installed at a maximum
distance of 20 ft. from the remote control for
proper signal transmission between the remote
control and the fan's receiving unit.
If you feel you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
Follow the steps below to connect the fan to your
household wiring. Use the plastic wire nuts with
your fan. Secure the plastic wire nuts with
electrical tape. Make sure there are no loose
strands or connections.
5.
Step 1. Insert the receiver into the mounting
bracket with the flat side of the receiver facing the
ceiling.
Step 2. Make wire connections from the fan to the
receiver.
From Fan
To Receiver
---------
White Wire
White Wire "For Light"
----------
Blue Wire
Blue Wire "For Light"
-------
Yellow Wire
Yellow Wire
----------
Red Wire
Red Wire
---------
Grey Wire
Grey Wire
Step 3. Make wire connections from the filter to the
outlet box as follows, using the wire nuts.
From Filter
To Outlet Box
------
Black Wire "AC in L"
Black Wire (Hot)
------
White Wire "AC in N"
White Wire (Neutral)
From Fan, Filter & Receiver To Outlet Box
-----
Green Wires*
Green or Bare Wire (Ground)
* There are four green grounding leads: from the
mounting bracket, hanger ball/downrod assembly,
receiver and the filter.
Turn the wire nut connections upward,
Step 4.
spreading them apart so the green (ground) and white
wires will be on one side of the outlet box and the black
and blue wires will be on the other side. Carefully tuck
the connections up into the outlet box.
White
Black
Outlet Box
White
Black
Filter
White
Black
Receiver
White
Blue
Yellow
Red
Grey
Grey
Red
Yellow
Blue
White
Canopy
Figure 8
Ground conductor
Green
Green
Green
Green
Green

Publicidad

Tabla de contenido
loading

Tabla de contenido