Carlson Pet Products 2200 Manual De Instrucciones página 7

STEP 5
Reassemble the upper locking joint by adding the toothed disk and locking knob.
STEP 6
Tighten each of the locking knobs by
turning them clockwise, fixing the pet
yard into the configuration you have
chosen. To position the pet yard into
a new configuration or shape, simply
loosen each of the locking knobs,
adjust and re-tighten.
NOTE: When adding or removing additional panel units to the configuration, panels must be
added or subtracted in sets of two for the freestanding enclosure to function properly. ADDITIONAL
PANELS SOLD SEPARATELY.
ENGLISH
7