Descargar Imprimir esta página

Technoline WS6462 Manual Del Usuario página 26

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
 Close the battery compartment.
Reception of the Radio signal:
 The clock automatically starts the DCF signal search after 7 minutes of any restart or changing of new fresh batteries.
The radio mast icon starts to flash.
 At 1:00 /2:00 / 3:00, the clock automatically starts the synchronization procedure with the DCF signal to correct any
deviations to the exact time. If this synchronization attempt is unsuccessful (the radio mast icon disappears from the
display), the system will automatically attempt another synchronization at the next full one hour. This procedure is
repeated automatically up to total 5 times.
 To start manual DCF signal reception, press and hold down the "▲" button for two seconds. If no signals received
within 7 minutes, then the DCF signal search stops (the radio mast icon disappears) and start again at the next full one
hour.
 During RC reception,to stop searching radio signal, press the "▲" button once.
Notes:
 A flashing radio mast icon indicates that the DCF signal reception has started
 A continuously displayed radio mast icon indicates that the DCF signal was received successfully
 We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or computer
monitors
 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such circumstances, place the

Publicidad

loading