Technoline WS6462 Manual Del Usuario página 32

 After successfully connecting with the outdoor sensor, the weather station can display the outdoor
temperature/humidity and the temperature/humidity trend (outdoor)
 You may see the following displays:
The temperature/humidity is rising.
The temperature/humidity is remaining constant.
The temperature/humidity is falling.
RF Transmission Procedure:
 The weather station automatically starts receiving transmission from outdoor thermo sensor for outdoor temperature &
humidity after batteries inserted.
 The outdoor sensor will automatically transmit temperature and humidity signal to the weather station after batteries
inserted.
 If the weather station failed to receive transmission from outdoor sensor ("- -"display on the LCD), press and hold "▼"
button for 3 seconds to receive transmission manually. RF icon " " flashes on the LCD，the weather station starts to
receive the outdoor sensor.
Setting the channel
Please select a different channel for the outdoor sensor by pressing the "▼"button on the weather station. The relevant
data is shown in the LC display:
- 1: Outdoor sensor channel 1