Technoline WS6462 Manual Del Usuario página 33

- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
- : automatic channel change
Notes:
 The channel switch on the backside of outdoor sensor sets the channel on which the outdoor sensor data are
transmitted.
 Hold "▼" button for 3 seconds to receive transmission on the selected outdoor sensor channel manually.
Maximum/Minimum Temperature/Relative Humidity
 To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the "MEM" button:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values
Three times to return to the current temperature and humidity levels
 To reset the maximum and minimum temperature and humidity, press and hold down the "MEM" button about 2
seconds. This will reset all minimum and maximum data recorded to the current displayed values.
Note:
 If the temperature reading is below ranges, the LL.L will be displayed. If the temperature reading is above ranges, the
HH.H will be displayed.