Led Mode-Keyboard - Monster semruk S7 V8.1 Manual De Usuario

EN
On boot the keyboard will momentarily flash. You can click in the Override Boot
Effect check box to disable the keyboard flashing effect as the system boots.
The keyboard LED may be configured using the Fn + key combination outlined
in the table below.
Table 4 - Keyboard LEDs

LED Mode-Keyboard

Click Keyboard, on the left under LED Mode, to set individual color settings for
any keyboard keys you may wish to highlight.
Simply click to highlight any keys to which you wish to apply the color, and
then click a color from the color swatch to apply the color. To highlight further
keys first click to deselect any previously selected keys, then repeat the above
procedure. To clear settings click Restore.
22
Keyboard LED Function key Combinations
Launch the LED Keyboard Application
Toggle the Keyboard LED On/Off
Keyboard LED Illumination Decrease
Keyboard LED Illumination Increase
Figure 15 - LED Keyboard
Application