Tpm Actions; Troubleshooting - Monster semruk S7 V8.1 Manual De Usuario

TPM Actions

1. Click Prepare the TPM and follow the instructions in the Wizard to prepare
the TPM (this will probably require a restart of the computer and
confirmation of the setting changes after restart by pressing the
appropriate F key).
2. After the restart the TPM will be prepared and you can then use the Actions
menu to Turn TPM off, Change Owner Password, Clear TPM or Reset TPM
Lockout.
3. A wizard will help take you through any setup steps.

Troubleshooting

Problem
The Wireless LAN/Bluetooth
modules cannot be detected.
The PC Camera module
cannot be detected.
The computer is off (or in
Sleep Mode) but powered by
the AC/DC adapter plugged
in to a working outlet or
powered by the battery with
a capacity level above 20%.
I have plugged a device into
the powered USB port in
order to charge it, but the
device is not charging.
Gaming performance
is slow.
Latest Specification Information
The specifications listed in this section are correct at the time of going to press.
Certain items (particularly processor types/speeds) may be changed, delayed
or updated due to the manufacturer's release schedule. Check with your service
center for details. Note that this computer model series may support a range of
CPUs and/or video adapters. To find out which CPU is installed on your system go
to the Start menu and select Settings, and then select System and click About.
This will also provide information on the amount of Installed RAM etc. To get infor-
mation on your system's video adapter go to the Start menu and select Settings,
and then select System and click Display > Advanced display settings > Display
adapter properties.
Possible Cause-Solution
The modules are off as the computer is in Airplane Mode. Use the
Fn+F11 key combination to toggle Airplane Mode on/off
The module is off. Press the Fn+F10 key combination in order to
enable the module. Run the camera application to view the camera
picture.
The port is not powered on. Toggle power to the port using the
Fn + Power Button combination.
This function may not work with certain external USB compliant
devices (check your device's documentation). If this is the case,
power the computer on and connect the external USB device in
order to charge it.
It is recommended that you use Maximum fan speed when playing
games. Use the Fn+1 key combination to adjust the fan speed.
EN
33