Disabling Intel® Optane; Raid Setup - Monster semruk S7 V8.1 Manual De Usuario

EN
Disabling Intel® Optane™
If you wish to disable an existing Intel® Optane™ setup then follow the
procedure below to do so.
1. Run the Intel® Optane™ Memory and Storage Management application.
2. Click Intel® Optane™ Memory and then click Disable.
3. Click Disable when you see the following message.
4. Restart the computer to complete the process.
5. Run the Intel® Optane™ Memory and Storage Management application.
6. The Intel® Optane™ Memory Status is indicated in the Window.

RAID Setup

Your solid state drives (SSDs) can be set up in RAID mode (for increased perfor-
mance or protection). Note that setting up your solid state drives in RAID mode
needs to be done prior to installing the Windows OS. Do not change the mode
unless you intend to reinstall your operating system, and make sure you back up
all necessary files and data before doing so.
To configure your RAID (Redundant Array of Independent Disks) system in
Striping (RAID 0) or Mirroring (RAID 1) mode (see Table 1) you will require two
identical solid state drives.
08
Figure 3
Intel® Optane™
Memory and Storage
Management-Disable