Improper Use; Work Area - Eurosystems MLT 01 Manual De Uso

lighting and visibility (minimum visibility re-
quired equal to the work area defined in the
"WORK AREA" paragraph).
7. Do not work during thunderstorms
and/or on wet or slippery ground.
8. Do not work on slopes of more than
10° unless using specific equipment
for work on slopes (not available on all
machines or versions). Use the utmost
caution when reversing the direction of
travel and when pulling the machine to-
wards you.
9. Always make sure that there are sup-
port points on slopes. Keep feet at a
suitable distance from the tools and do
not put hands or feet near moving parts.
10. Always drive the machine with both
hands on the handlebar.
11. Do not work near ditches or embank-
ments. If a wheel crosses the roadside,
the car may suddenly overturn.
12. Do not reverse the machine with
your back to a wall or similar objects to
avoid being trapped.
Instructions for adjustment and mainte-
nance:
DANGER!
All ADJUSTMENT and MAINTENANCE
operations must be carried out with the
motor switched off. Remove the spark
plug cap or ignition key (if present) to
avoid unexpected start-up.
Keep all nuts, bolts and screws tightened
to ensure safe machine operation.
Only use original Eurosystems spare
parts. The owner loses all warranty rights
when using non-original spare parts.
Do not make any structural changes or
adaptations. Such changes will invalidate
the warranty and the manufacturer's lia-
bility.
We reserve the right to make design im-
provements to the machine and/or the in-
terchangeable equipment without making
changes to these instructions.
Instructions for lifting:
DANGER!
Use lifting systems that are undamaged
and suitable for the masses to be lifted
(see the HANDLING AND TRANSPORT
paragraph).
DANGER!
Do not stand under suspended loads.
2.1 DESCRIPTION AND FIELD OF USE
The MLT 01 machine is a multi-tool
machine designed for hobby purpose on
private properties.
The tools compatible with the MLT 01
machine at the time of publication of this
manual are:
-cutter bar for lawn-mowing;
- rotating sickle for the maintenance of
the undergrowth and lawn-mowing;
- flat mower for grass cutting and street
cleaning;
- snow blade for snow removing;
-front brush for clearing debris from
sidewalks.
The instructions for safely using the tools
compatible with the MLT 01 machine will
be present in a dedicated manual which
is delivered together with this manual.

2.2 IMPROPER USE

DANGER!
All the dangers described in this para-
graph can generate serious injury or
death of the operator.
1. Use the machine only for the use in-
tended by the type of equipment mounted.
2. Do not use the machine to transport ob-
jects, people or animals.
3. Do not use the machine to tow and/or
push carts or other devices.
4. Do not mount equipment not authorized
by the manufacturer.
5. Do not modify machine parts.
6. Do not exclude or tamper with protec-
tion systems.

2.3 WORK AREA

The user is responsible for the safety of
persons, property and animals within the
machine danger zone.
This zone is defined as the internal area
of a circumference of a minimum radius
of 20m with the tool mounted on the ma-
chine in the centre.
DANGER!
The minimum radius of 20m can be in-
creased depending on the type of inter-
changeable equipment mounted on the
machine. See each specific manual for
more information.
Do not stand in the danger zone for any
reason while the machine is in operation.
Only the operator, who has read and un-
derstood the manual in all its parts, is au-
thorised to stand within this area and to
occupy the only operating position, locat-
ed behind the handlebar, holding it firmly.
The operator must check the surrounding area
before starting the machine and must pay par-
ticular attention to children and animals.
Before starting work on a certain area,
clean it of foreign objects.
Always pay attention to the ground and the
surrounding area when working. If unde-
sired and/or dangerous objects are de-
tected, switch off the machine and secure
it before leaving the operating position to
remove them, being sure to prevent the
machine from starting, moving or tipping
over.
2.4 CLOTHING
INFORMATION!
The procurement of such personal pro-
tective equipment is the sole responsi-
bility of the customer or employer.
During machine use and maintenance
operations:
The operator MUST always wear suitable
safety shoes, gloves, and hearing protec-
tion devices and wear long, resistant trou-
sers and safety goggles.
Do not wear loose-fitting clothing, jewelry,
ties, scarves, dangling drawstrings
could get caught by the equipment . Tie up
your hair.
During unpacking and assembly:
The operator MUST always wear resistant
safety shoes, gloves, and clothing.
3. DEFINITION OF PICTOGRAMS
CAUTION – read the manual.
that