Hardware Contents; Safety Information - Harbor Breeze ANIVA BAY Manual Del Usuario

HARDWARE CONTENTS (shown actual size)
AA
Screw
Qty.
9 + 1 extra

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
Before you begin installing the fan, disconnect the power by removing fuses or turning off circuit
breakers.
Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades
to the floor and at least 30 in. from the ends of the blades to any obstruction.
If you are mounting the fan to a ceiling outlet box, use a METAL octagonal outlet box, not plastic.
Secure the outlet box directly to the building structure. The outlet box and its support must be able
to support the moving weight of the fan (at least 35 lbs.).
To reduce the risk of fire, electrical shock, or personal injury, wire connectors provided with this
fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If
your house wire is larger than 12-gauge or there is more than one house wire to connect to the
two fan lead wires, consult an electrician for the proper size wire connectors to use. Before
cutting, drilling or hammering, verify their location. If needed, contact your electrician, plumber
or service person.
To reduce the risk of fire, electric shock or personal injury, do not bend the blade arms when
the rotating fan blades. Mount to outlet box marked "ACCEPTABLE FOR FAN SUPPORT" and
use mounting screws provided with the outlet box. Most outlet boxes commonly used for the
support of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
could result in damage to the ceiling fan's remote control unit.
BB
Fiber
Washer
Qty.
9 + 1 extra
4
CC
Wire
Connector
Qty.
3 + 1 extra
Lowes.com/harborbreeze