Operating Instructions; Important - Harbor Breeze ANIVA BAY Manual Del Usuario

OPERATING INSTRUCTIONS

1. Restore electrical power to the outlet box by
turning the electricity on at the main fuse box.
WARNING
Do not operate this fan with a variable (Rheostat)
wall controller or dimmer switch. Doing so could
result in damage to the ceiling fan's remote control
unit.
IMPORTANT: Using a full range dimmer switch
2.
(not included) to control fan speed will damage
the fan. To reduce the risk of fire or electrical shock,
do not use a full range dimmer switch to control the
fan speed.
3. Remove the battery cover from the remote in
remote pack (K) and install the battery from
remote pack (K). Ensure the polarity of the
battery matches the polarity in the battery
compartment.
Note: When it is time to replace battery, use a
12-volt alkaline battery.
CAUTION: If you are not expecting to use the
remote for a long period of time, remove it to
prevent damage. Be sure to store the remote
away from excess heat or humidity.
1
2 2
For illustrative purposes only-not
intended to cover all types of controls
2 3
14
ON ON
ON ON
ON ON
ON ON
Remote
12V