Wiring Instructions - Harbor Breeze ANIVA BAY Manual Del Usuario

WIRING INSTRUCTIONS

WARNING
To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring
this fan.
Note: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice.
1. Connect the green grounding wire from the
downrod assembly (C) and the green grounding
wire from the hanger bracket (B) to the supply
grounding conductor (this may be a bare wire or
wire with green colored insulation). Securely
connect wires with wire connector (CC).
Securely connect the white fan motor wire to the
white supply (neutral) wire using wire connector
(CC). Securely connect the black fan motor wire
to the black supply wire using wire connector
(CC).
Hardware Used
Wire
CC
Connector
2. After connections have been made, turn wires
upward and carefully push wires into the outlet
box, with the white and green wires to one side
of the box and the black wires toward the
other side.
WARNING
Check to see all connections are tight and no
bare wire is visible at the wire connectors
except for the ground wire.
x 3
10
1
White Wire
Green Wire
from Supply
from Supply
(Ground)
CC
Green Wire
from Downrod
Assembly
(Ground)
Green Wire
from Hanger
C
Ball (Ground)
2
White
Wire
CC
Green
Wire
CC
Outlet Box
Household
Supply
Black Wire
from Supply
Black Wire
from Fan
B
White Wire
from Fan
CC
Black Wire