Kohler K-3020 Guia De Instalacion página 10

Sealant
7. Install the Bathroom Sink
CAUTION: Risk of personal injury. Large bathroom sinks
are very heavy. Get help lifting the bathroom sink into place.
Install the drain to the bathroom sink according to the drain
manufacturer's instructions.
Apply silicone sealant to the top of the bathroom sink in a
continuous bead with no gaps.
With a partner, carefully fit the bathroom sink into place, and
position the clips under the bathroom sink to hold it in place.
Position the bathroom sink so the tabletop slightly overhangs the
bathroom sink on all sides. Check for symmetry.
Carefully tighten the clips securely, but do not overtighten. Wipe
away any excess sealant immediately.
Allow the sealant to cure for 24 hours before using the bathroom
sink.
Complete the drain and trap connections, and connect the water
supplies to the faucet. Follow the manufacturer's instructions.
1020589-2-B
Bathroom Sink Clip
10 Kohler Co.