Kohler K-3020 Guia De Instalacion página 4

19-1/8"
(486 mm)
Drywall
Screw
27-3/16"
(691 mm)
2. Install the Towel Bracket - 42" (1067 mm) only
NOTE: The large 42" (1067 mm) model is the only unit that
accommodates square legs (with towel bars). Octagonal legs
(without towel bars) fit both the large and small console tables.
The towel bar wall-mount brackets must be located 27-3/16" (691
mm) from the floor and 19-1/8" (486 mm) to each side of the
centerline. Measure carefully to determine this location.
Using a pencil, mark the center position of each towel bar
wall-mount bracket. Re-measure to confirm that you have marked
the correct location.
Fasten each bracket to the wall at the marked location using a
drywall screw.
Make sure the brackets are level.
1020589-2-B
Wall-mount
Bracket
Seam
Left Leg
Leg
Bracket
Protrusion
Bolt
42"
(1067 mm)
Towel Bar
Frame
4
Right
Leg
Towel
Bar
Kohler Co.