Use; Control Panel; Operation; Heating Water - Cuisinart CPK18E Instrucciones

3. USE

Before using for the fi rst time we recommend operating the
kettle 2 or 3 times. Fill to the MAX mark fi ll level (1.7L), bring
to the boil and when boiling has fi nished and the kettle has
switched off , discard the water and rinse out the inside.
A. Control panel
75°C
85°C
95°C
On/Off Switch : used to turn the kettle on and off .
Temperature selector: 6 temperatures (75°C, 80°C,
85°C, 90°C, 95°C and 100°C).
Keep Warm Button
temperature for 30 minutes.
Cover release button : to open the cover.
80°C
90°C
100°C
: maintains the water
B. Operation

Heating water

• Open the cover by pressing the button
• Pour the desired amount of cold water in the kettle
ensuring to keep between the "MIN" and "MAX" levels
marked on the water gauge.
• Push the lid closed; you will feel and hear a slight «click».
• Gently place the kettle on the base.
• Plug the kettle into the mains.
• Press the button of the desired temperature.
• Press the button to heat the water. The temperature
button selected will fl ash. The water level indicator at the
rear of the kettle will turn on. An audio signal will sound for
1 second to indicate that the process has begun.
N.B. If the switch is pressed but the temperature has not
been set, the kettle will default to 100°C.
• When the kettle has reached the selected temperature it
will beep 5 times and switch off . The light illuminating the
water indicator window will turn off .
• The kettle can also be turned off at any time by pressing
the button or by removing it from the base.
N.B. The temperature can be changed at any time during the
boiling process by pressing one of the preset temperature
options. If the temperature selected during boiling is lower
than the temperature of the water in the kettle or the kettle
is off and the water is still hotter than the temperature
selected, the temperature button will fl ash, and the kettle
will switch off and beep 5 times once the water temperature
drop to the selected temperature. If the temperature
selected during boiling is same as the temperature of the
water in the kettle, it will switch off and beep 5 times. When
the kettle is off , select a temperature and then press On/Off
switch, if the temperature of the water in the kettle is the
.
17