Intended Use - Lukas LX-Strut Instrucciones De Uso

3. Intended use

The LX-Strut was developed as a lightweight stabilisation system for stabilising vehicles
after traffic accidents. The LX-Strut can form a triangle of forces.
The system uses the dead weight of the vehicle to be stabilised. This allows the stabili-
sation system to be used in a technical rescue.
Its comprehensive functionality and application require
specialised, appropriate training.
The LX-Strut is designed for the following scenarios.
- Passenger car in lateral position
- Car on its roof
- Passenger car on another passenger car
LUKAS Operating Instructions LX-Strut
WARNING / BEWARE!
The LX-Strut is not suitable for supporting and shifting loads!
Do not lift the vehicle when tightening the straps.
The vehicle is stable as soon as the tensioning straps
are tightened!
Afterwards the belts must not be tensioned any further!
CORRECT
LUKAS Operating Instructions LX-Strut
26
INCORRECT
LOAD
27