Klarstein Illuminosa Manual Del Usuario página 36

EN
36
Sealing the hob
The hob has a special seal which prevents liquid from infiltrating into the cabinet. Strictly
comply with the following instructions in order to correctly apply this seal:
• Back board of the reverse side' edge use the foam-rubber cushion to paste a round
(see figure 6).
• Evenly and securely fix the seal to the hob, pressing it in place with the fingers.
• Remove the strip of protective paper from the seal. Insert the hooks into their relative
housings (K) on the hob and set this into the hole in the cabinet. Lock it in place with
the relative fixing screws (V) (see figure 7).
• Put the pan support on the mark of top plate (see figure 8).
Figure 6
Figure 8
Figure 7