Cleaning And Maintenance - GE 898694 Manual Del Usuario

CLEANING AND MAINTENANCE

self-cleaning
• This function removes scale and mineral build-up in the steam chamber.
• Fill the iron to half its capacity with water ( Filling iron with water).
• Connect the power plug (8) to a suitable electrical outlet.
• Slide the function control (4) to the dry ironing
• Set the temperature control (13) to the highest temperature cotton-linen
Place the iron on its heel (11) and let it heat up (ill. e ).
•
• Wait for 2-3 minutes until the desired temperature is reached. Set the temperature
control (13) to off (o). Disconnect the iron from the electrical outlet.
• Slide the function control (4) to the steam ironing
• hold the iron over a sink with one hand, and press and hold the self clean
button (14) continuously with the other hand. CAuTion! burn hazard: Boiling
water with steam and impurities is ejected from the soleplate nozzles (16).
• Gently move the iron back and forth.
• Release the self clean button (14) when the water tank (15) is completely empty.
Cleaning the iron
• Do not use harsh abrasives, chemical cleaners or solvents to clean the casing of
your iron, as these will damage its surface.
• To clean the occasional build-up of scale on the soleplate (16) and the casing, just
wipe with a soft damp cloth.
storage
• Before storage, make sure to turn the iron off (o) and empty the water tank (15)
( Turning iron off (o) and emptying water tank).
• Let the iron cool and dry completely.
• hold the power plug (8) with one hand, and press and hold the cord retraction
button (10) with the other hand to retract the power cord (8) (ill. l ).
• Store the iron in a dry and cool place, away from children and pets.
898694-Iron-EN+ES-01.indb 11
position (ill. d ).
position (ill. g ).
11
.
3/6/12 4:58 PM