Cleaning And User Maintenance - Slime 40045 Instrucciones

CLEANING AND USER MAINTENANCE

1. This product has no user serviceable parts.
2. To clean the inflator, unplug the unit from the electrical outlet and wipe with a clean,
dry cloth to remove debris.
3. Store indoors.
TROUBLESHOOTING
Inflator does not turn on:
1. Make sure plug is fully inserted into the wall outlet.
2. Make sure the outlet is live by using a known functional electronic device.
3. Check the power cord for damaged prongs, frays or breaks.
Inflator runs but does not inflate:
1. Be sure the air hose connector is tightly screwed onto the valve stem.
2. Check tire for leaks.
3. Check air hose for breaks and leaks at fittings.
4. Check tire valve for leaks.
5. Check valve core for damage.
Inflator runs slowly:
1. The inflator may have overheated from excessive use. Shut it off and allow it to cool for
25 minutes.
NOTE: If tire is totally deflated, it is possible that the tire could
separate from the rim allowing air to leak out when trying to
inflate. In the event this occurs, it may be necessary to jack up
the tire prior to inflation.
TREAD DEPTH GAUGE INSTRUCTIONS
1. For each measurement, fully extend tread depth probe by
pushing on the top of the gauge.
2. Place probe in the center, inner and outer grooves of the tire.
Checking multiple grooves allows you to check for uneven
wear.
3. Press on the black platform until the underside is rested on
the top of the tire tread.
4. Take the measurement by reading the first visible number
above the metal gauge barrel.
5. Repeat for next tire.
NOTE: Readings in the yellow and red zones indicate low tire tread levels.