Jata electro PL1028 Instrucciones De Uso página 12

Plancha de vapor cerámica
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• When connected to the mains or cooling down, hold
the steam iron and the cable cord out of the reach of
children under 8 years old.
• VERY IMPORTANT: Never immerse the appliance
in water or any other liquid.
• You may get some smoke and/or smells during the
first few uses. This is completely normal in this kind of
appliances.
• During the first use it is possible that the products
used in the manufacturing process of the appliance
may contaminate the steam. We recommend that
you allow the steam to flow for a few minutes before
starting to iron.
• It there still rests of water in the tank, it is due to the
quality controls made in our production line.
• The cleaning and maintenance done by users, can not
be done by children without any supervision.
• If the cable were to deteriorate it must be changed by
an Authorised Service Centre.
INSTRUCTIONS OF USE
AUTO OFF
• The iron is protected by a safety device, which automatically disconnects it after a certain period of time
depending on the position the iron has been left.
- Horizontal position: 30 seconds approximately.
- Vertical position: 8 minutes approximately.
• When this happens the auto off indicator (2) will start flashing to indicate that the iron has been
disconnected.
• For the iron to go on again it is enough to move it by changing its position. Doing that operation the
auto off indicator (2) will switch off.
STEAM IRONING
• Set the temperature selector (9) to its maximum position (max) by turning it clockwise.
• Before filling the tank with water, set the adjustable steam knob (5) to the off position ( ).
• To fill the tank, always do so with the iron unplugged from the mains.
• Open the filling lid (6) and pour water into the tank using the cup provided.
12

Publicidad

Tabla de contenido
loading

Tabla de contenido