Section
02
Connecting the system
Connecting the system
The navigation unit
Power cord
For connection, refer to the
wiring and installation manual
separately supplied.
Wired remote input (SWC)
Please refer to the instruction manual for the Hard-wired remote
control adapter.
(*1)
Make sure that the three yellow, green and blue connectors are attached before
connecting the system.
( * 2)
Connect either the USB interface cable for iPod or an appropriate USB storage
device.
( * 3)
When connecting your iPod, both connections are necessary.
(*4)
For details concerning operations and compatibility, refer to Operation
Manual.
8
Engb
Fuse (15 A)
Control line cable
25 cm
12 cm
(*1)
Vehicle aerial
Microphone jack (MIC)
12 cm
12 cm