Cequent Performance Products 24944 Instrucciones De Instalación página 6

Reinstall lower fascia and wiring clips – reinstall the lower fascia
8.
aligning tabs in lower fascia with upper fascia. Reinstall the (5)
wiring clips into fascia tabs above the bumper beam.
9. Trim center underbody panel – measure, mark, and trim the center
underbody panel.
2-7/8"
©2016 Cequent™ Performance Products, Inc. -
4-1/2"
Printed in Mexico
8. Continued:
Reinstall the (2) screws at outer edge of fascia.
Reinstall underbody panels – reinstall the (3) underbody panels
10.
using the (14) push-type rivets and the (3) threaded panel
fasteners.
Sheet 6 of 18 24944NP 10-25-16 Rev. B