Maintenance - JANE EXO Instrucciones

stored.
• The EXO seat should be duly fastened with
the seat belts, even when it is not in use, as in
the event of an accident it could be flung about
causing injury to the occupants of the vehicle.

MAINTENANCE

Do not expose the upholstery to sunlight for
long periods of time, while the seat is not in
use cover it up or store it in the luggage com-
partment.
Wash the plastic parts with soap and warm
water, then carefully dry all the components.
The upholstery can be removed for washing.
Follow the instructions listed below:
Take the cover off the headrest. Remove the
upholstery from around the wing of the seat.
• Remember not to use the EXO seat in vehi-
cles fitted with a frontal airbag, unless it can
be disconnected or deactivated, which should
be consulted with the vehicle manufacturer or
retailer.
Undo the Velcro on the central part and take
the upholstery off.
Wash at a temperature that does not exceed
30ºC.
To fit the upholstery again, follow the same
steps in reverse order.
For your safety and the good conservation of
this product, it is important to bring it to one of
our official workshops for regular inspections.
45