Cequent Performance Products 24945 Instrucciones De Instalación página 7

11. Reinstall rear sensor – if equipped, reinstall the rear sensor and
reconnect the wiring.
13. Reinstall fascia and taillights – reinstall fascia, taillights, and (2)
plastic panels near trunk.
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
12. Reinstall heat shield – reinstall trimmed heat shield.
14. Reinstall (2) plastic underbody panels – reinstall the (2) plastic
underbody panels and reattach the wiring clips to panel on driver's side.
Sheet 7 of 21 24945NP
Heat shield
(trimmed)
4-26-16 Rev. A