Operation; Quick Start; Before Washing; After Washing - EAS ELECTRIC EMW9420GW Manual De Instrucciones

OPERATION

Quick Start

Caution!
• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any
residual water and to neutralize potential odors, it's recommended to clean your
appliance before first use. For this reason, start the Algodón program at 90°C
without laundry and detergent.

1. Before Washing

1
earth
terminal
Plug in
Note!
• Detergent need to be added in compartment I if the pre-wash function is selected.
2. Washing
1
Select programme Select function or

3. After Washing

The door lock and the [Inicio/Pausa ] lights flash with the buzzer beeping or two
small points flash on the digital screen.
2
Open tap
2
Press
remain default
Start/Pause to
settings
start the program
3
Load Close door
3
13
4 5
Main
wash
Softener
Prewash
Add detergent
V.1